Muchina weKuchera weUniversal Milling ZX6350ZA
MUCHINA WOKUGAYA WEKUCHERA:
Z-otomatiki chikafu chigayo musoro
2. Nzira yekutakura zvinhu ine rectangular iri pachikuva chekusimudza
3. Kugadzikana kwakanyanya
4. Yakaomarara paX, Y, Zaxes.
5. Musoro wakamira unotenderera +- 45 degrees.
6. Kufamba kweX--axis kunogona kuitwa ne800mm (Sarudzo)
ZVINHU ZVINONYANYA KUKOSHA:
| MUENZANISO | CHIKAMU | ZX6350ZA |
| Chinovhara jira rekurukira |
| MT4/ISO40 |
| Kureba kwemota yehuni kusvika patafura | mm | 100-400 |
| Daro rakatwasuka chokurukisa patafura | mm | 0~300 |
| Kureba kwechigunwe kusvika pambiru | mm | 200~550 |
| Mhando dzembeu dzespindle | r/min | (Nhanho 8)60-1500 (yakatwasuka) |
| Chifukidziro cheOtomatiki cheFeed Series | mm | 120 (yakatwasuka) |
| Saizi yetafura | mm | 1250×320 |
| Kufamba patafura | mm | 800/300/300 |
| Daro rakatwasuka chokurukisa ruoko | mm | 175 |
| Tafura yekudyara huwandu (x/y) | mm/miniti | 22-555(matanho masere)(max.810) |
| T yetafura (nhamba/upamhi/daro) | mm | 3/14/70 |
| Mota huru | kw | 0.85/1.5 (yakatwasuka); 2.2 (yakatwasuka) |
| Mota yemagetsi etafura | w | 750 |
| Mota yepombi inotonhorera | w | 40 |
| NW/GW | kg | 1450/1600 |
| Chiyero chose | mm | 1700×1480×2150 |
| ZVIMWE ZVINOSHANDISWA | ZVIMWE ZVINOSARUDZA |
| Chiedza chebasa, chinotonhodza, chibooreso chebooreso, chigayo chemill, maspindle arbor, mahorizontally arbor, mawrenches | DRO pa X, Y, Z--AXIS. Musoro unoparadzanisa wese. Tafura yekushanda inotenderera. Kiti yekubatidza. |
